Calibration Guide

Bed Leveling

Bed leveling ensures the print surface is flat and at the correct height relative to the nozzle. Use a piece of paper to test the gap between the nozzle and bed. Adjust the bed screws until the paper is slightly resistant when pulled through.

Extruder Calibration

Calibrate the extruder steps to ensure accurate filament extrusion. Use a ruler to measure extruded filament length and adjust the steps/mm in the printer's firmware.

Temperature Tuning

Test extrusion temperatures for different filaments. Start with the manufacturer's recommended temperatures and adjust by ±5°C as needed for better flow or adhesion.